Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism broken? Maybe the window or door handles aren't able to connect correctly or are difficult to use.

You will lose energy when your double-glazed doors do not function properly. This also increases the risk of burglary. Owen the Locksmith will be able to repair your door lock at reasonable costs.

Snapped Key

If a key is snapped off in the lock, it can be incredibly annoying. It could also be a security risk, as it may leave you vulnerable to burglars if your door is not locked. There are a few easy fixes you can make to resolve the issue and get your door working again.

Keep calm. If you panic, you could end up pushing the broken key further into the lock.

Spray WD-40, or any other penetrating lubricant into the lock. This will help the broken piece to come out more easily. You can also make use of a screwdriver to break pieces that could be blocking the way. If you're fortunate enough to have a bit of the key left visible and you want to remove it, use a paperclip or some other thin metal object to grab it and then pull it out. Both methods work, but be careful not to push the broken key further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you do not have any of these handy, you can use needle-nose pliers to bend and create hooks. Additionally, a pair of tweezers can be used to grip and pull out the remaining part of the broken key.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It's usually available at most hardware stores. It is used to freeze any water or ice that could be in the lock.

If none of these tricks appear to be working, it might be time to call in locksmith. Fitlocks experts can quickly fix problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Request a repair for your double glazing through us online or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder can pose a serious security risk. A professional locksmith can easily fix the cylinder. Locksmiths will need to tap the cylinder to repair it. This can be done with a hammer or other tool. The best method is to employ a wire or long match. Then, put the match's end or wire near the keyway. After this, the locksmith can hit the lock to break it open. This is much better than using a hammer, which could damage the lock.

Overheating is the main reason for cylinder heads to crack. This can happen when the cylinder block and head are made of different metals, including cast iron and aluminum. When various metals are heated and cool at different rates, it can cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion is another possible cause of cracks in the cylinder. If the cylinder block and head are not maintained in a timely manner they could be corroded or rust and cause them to expand faster than anticipated. This could lead to cracks over time.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety reasons. A faulty locking mechanism, misalignment or a worn handle are common causes of this issue.

This is a straightforward and cost-effective fix that a majority of double glazing owners can accomplish. A professional more info locksmith is able to fix this problem within one hour of arriving at the home. They can repair the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A professional locksmith will always be able to advise you on the most cost-effective solutions for your home. They can also suggest upgrades to high-security 3 Star TS007 euro cylinders that will provide an extra layer of security against burglars. It's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms that wear out over time. It can be difficult to determine the reason behind a broken window handle lock and then fix it properly.

If the issue is with the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and help you stop the draughts. Incorrectly repairing or replacing your handle can be very expensive and can damage the door's frame and lock, so it's worth taking the time to do it correctly.

With the window in the open position then loosen the screw that holds the handle with the screwdriver. The screw should be on the inside of the backplate, usually hidden by the cap of the screw for aesthetic purposes. It is not recommended to lose any internal components of the handle, such as the levers and plates double glazed window repairs near me on either side. Ideally, keep them in the same order so you can replace them again when needed.

Next, turn the handle until it's 90 degrees to the window frame and loosen double glazed repairs near me the screw on the back of the handle that fixes it to the internal spindle by using a second screwdriver. Once the screw is loose, take the handle off and take the broken spindle out. Replace it with a new one, making sure it is the same length as the previous one (you will typically find them on the internet or in hardware stores) and securely screw it into the right place. Be careful not to tighten too much because this could cause damage to the handle or the window frame.

Close the handle and try it. It is likely that it will operate smoothly and you'll be able to open your window once more.

Make sure to check that your uPVC window is shut correctly while you're working with the handle. If they don't cause damp and draughts in your home as in addition to compromising the energy efficiency of your home. A local window company, like Core Sash Windows, will be capable of adjusting the hinges on your window frames to ensure they are able to shut properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is particularly common in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the window frame. The handle is attached to a central rod that activates a series of mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has been damaged and this could be a very frustrating issue.

There are ways to fix this issue. A good locksmith can quickly and effectively address this problem. They can remove the window handle using a tool to remove the wheel component of the mechanism that is where the spindle goes. This can be done with no damage to the handle or window frame.

Once the double glazed window near me wheel is removed, the technician can inspect the spindle and determine what caused it to break. This involves breaking down the double glazed window near me spindle into its individual components and carefully observing their general condition, as well as any particular areas of wear or damage. This procedure is usually done in a clean, well-lit room by highly skilled technicians.

The next step is to clean the damaged spindle, this assists in removing any debris or dirt that might be hindering its normal function. After that, the spindle can be repaired or replaced. If it is being replaced the technician can take a dowel of a similar size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the new spindle has precisely matched to the handle.

If the spindle is damaged and cannot be repaired, it could require replacement completely. Home centers can sell generic replacements however if your window style is rare then you'll have to speak with a cabinet maker or woodworker who can replicate the exact component. Once the spindle has been installed, it is fixed to the handle. The screw holes on the handle with the existing screws in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.